How to choose the right abrasive for any job

From car body repairs to DIY jobs, abrasives are used in various processes. However, there are lots of different types of abrasives available, so it’s important to find the right one for your needs.

To help, we’ve pulled together a guide to finding the right abrasive for any job.

What are abrasives?

Years of development from ongoing research and road testing ensure that Brembo brakes are among the very best on the market. Brembo brakes are trusted by thousands of drivers across the world on both the track and road and are used by many premium vehicle manufacturers as original equipment.

Abrasives are materials – usually a mineral – that is assembled onto different types of backing such as paper, fabric, fibre, and cloth. The chances are you’ve used an abrasive before, and one of the most common types is sandpaper.

When rubbed against something, abrasives help to shape or finish a surface and they’re used in various processes to polish, refine and cut.

Here are just a few jobs you might need an abrasive for:

  • Car body repairs
  • Marine and composites
  • Wood and furniture
  • Building and decoration

Why is it important to find the right abrasive?

Whether it’s removing a scratch or preparing a surface for a coat of paint, abrasives are needed for various tasks.

However, not all abrasives can be used for the same job. For example, heavy-duty sanding requires a rough abrasive which creates a deep scratch pattern, whereas a fine grain would be more appropriate for creating a smooth finish. So, it’s important to find the right one for your needs and using the most suitable abrasive will help achieve the desired result. This is especially the case for car body repairs where, now more than ever, the quality of finish relies on the quality of preparation from the start.

Learn more about car body repairs

Types of abrasives

There are three distinct stages to surface and car body repairs and abrasives generally fall under one of these categories:

Preparation

The key to a successful job is preparation, and this stage is all about preparing a surface. For example, when completing car body repairs, you might need to start by using an abrasive to remove paint, a scratch or rust. Sometimes, the filler will be required to restore a surface to its original shape, and this will also need preparation with an abrasive. At this stage, an abrasive with a larger mineral is required as these provide a deeper cut.

Directions of use: Try to work in a linear action and apply uniform pressure for best results (this guidance will vary depending on the product, so check the manufacturer’s instructions).

Prime

Once you’ve prepared the surface by getting rid of a scratch or paint, it’s time to prime the area ready for painting.

For most jobs like repairing car bodywork, multiple coats of primer need to be added to the surface before paint can be applied. An abrasive can then be used to smooth the primer ready for painting.

Directions of use: Work in a linear action and apply uniform pressure throughout the abrasive for best results (this will vary depending on the product, so check the manufacturer’s instructions).

Paint

The final stage for most surface and car body repairs is painting. Here, abrasives can be used between coats to smooth the surface or once all coats have been applied to help complete the job. This stage is all about smoothing the surface and only requires an abrasive with a smaller grain.

Directions of use: Follow the manufacturer’s instructions

Was this helpful?

Related articles that may be of interest